Auto ON-OFF Controller – MS02

Product Features

Product Dimension: 120MMX130MMX60MM
Product Warranty : 6 months from the date of purchase.

OPERATING MANUAL

1. Connect the timer unit to your starter as per the connection diagram
2. Switch on the Mains ON switch in the front side of the unit
3. If the display shows 2 Ph and Line OK LED not glows, interchange R &Y

Timer mode:

1. Using SET, UP and DOWN buttons set the running time (duration) of the motor (from 10 minute to 24 hours in 10 minutes interval)
2. Press SET button again. The display shows END
3. The motor starts automatically and runs for the set period.
4. If there is any number of power failures in the middle, motor re starts automatically and the power failure period will be compensated.
5. You can reset the timer in the absence of power also by interchanging the position of RESET switch when there is no power.

Auto mode:

1. Press and hold the DOWN button for 5 seconds, the unit enters AUTO mode. Display shows AUTO.
2. In this mode the unit works as Auto starter only.
3. The unit returns to Timer mode by again pressing and holding DOWN button for 5 seconds